21st Century Learning and Teaching

In this project we will create a basic gas sensor detector, we will use the CCS811 gas sensor and connect this to an LCD keypad shield.

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

If you’re ever wanted to make something awesome, but thought that you just didn’t have the right tools to do so, this soda fountain by “The Wrench” could provide the needed inspiration. 

The project uses an Arduino Nano to control a small air pump via a relay, which turns on when a glass is the correct dispensing position. This pushes air into a sealed soda bottle, and soda is pushed out of another tube to equalize the pressure.

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

In this Arduino Tutorial we will learn how a PIR Sensor works and how to use it with the Arduino Board for detecting motion. You can watch the following video or read the written tutorial below.

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

First Steps with the Arduino-UNO | Maker, MakerED, Coding | Sensor-Kit SKA-36 . Got my package delivered with my ordered Arduino Sensor-Kit today (2 days later than expected...). First impressions: nice plastic suitcase (helps me to keep order...), 60 pins quality breadboard and cable-set, 40 sensors and a download link (www.joy-it.net/sensorkit/) for the code…

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

https://gustmees.wordpress.com/?s=maker

This post is an introductory guide on how to use the Fingerprint Sensor Module with the Arduino. We’ll show you how to enroll a new fingerprint ID, and how to find a fingerprint match.

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Sensors

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=OLED

Motion sensing devices are commonly used in burglar alarms and automated lighting systems. The HC-SR501 is a motion sensor module that is inexpensive and very versatile.  It can be used all by itself or combined with a micrrocontroller or microcomputer to create a number of motion sensing products.

In this article you’ll learn how PIR (Passive Infrared) motion sensors work and how to use them with an Arduino or Raspberry Pi.

Learn more / En savoir plus / Mehr erfahren:

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

SO, as I got my new Super Starter Kit UNO R3 Project I am playing around a bit with it. In my previous post WE were wiring and testing a LCD-Display and coding to display a bit text on the LCD. That was actually very easy, so lets try out now some “Sensors“, e.g. a Temperature/Humidity Sensor and a Ultrasonic Sensor to measure distances. The measured values of those sensors will get displayed on the LCD-Display.

Learn more / En savoir plus / Mehr erfahren:

https://gustmees.wordpress.com/?s=maker

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO